MST-WPA-N Wireless

NOTE: Customers will first need to register their wireless device on Missouri S&T's network by visiting NetDB.


Mobile Devices

Windows 10 & 7 iPhone
Mac Android

Windows 10 & 7

  1. Register device on the Missouri S&T network, restart computer before continuing
  2. Right-click the network icon in the system tray
  3. Select Connect to a network
  4. Click Set up a connection or network
  5. Select Manually connect to a wireless network
  6. Enter the following settings:
       Network name: MST-WPA-N
       Security type: WPA2-Enterprise
       Encryption type: AES  
  7. Check Start this connection automatically
  8. Check Connect even if the network is not broadcasting
  9. Select Change connection settings
  10. Go to Security tab, select Protected EAP (PEAP)
  11. Click Settings...
  12. Uncheck Validate server certificate
  13. Under Select authentication method, select Secured password (EAP-MSCHAP v2)
  14. Click Configure...
  15. Uncheck Automatically use my Windows logon name and password (and domain if any)
  16. Click Advanced Settings
  17. Check the box for Specify authentication mode:
  18. Click OK until you get out of all the property windows
  19. When the pop up dialog box appears over the task bar, click it
  20. Under User name , enter your university username.
  21. In the Password field, enter your university password
  22. Under Logon domain, type UM-AD
  23. Click OK
  24. The pop up dialog box may appear again. Enter your username and password again
  25. Click OK
  26. For network type, select Work


  1. Register device on the Missouri S&T network, restart computer before continuing
  2. Select the wireless icon on the top menu bar
  3. Select the following settings:
       Network name: MST-WPA-N
       Security type: WPA2-Enterprise 
  4. Type your and password in the appropriate boxes
  5. Check Remember this network
  6. Click Join
  7. If you receive a Verify Certificate window, click Continue


  1. Register device on the Missouri S&T network
  2. Select Settings from your iPhone's main menu
  3. Select Wi-Fi
  4. Select MST-WPA-N
  5. In the Username field, type your (if this doesn't work, type UM-AD\ followed by your username)
  6. Enter your university password in the Password field
  7. Select Join
  8. Accept the certificate if asked 


Note: Due to variations in Android operating systems, the following instructions are approximated. If you require additional assistance or clarification, please contact the Missouri S&T IT Help Desk.

  1. Register device on the Missouri S&T network
  2. Select Settings on your Android device's main menu
  3. Select Wireless & Networks
  4. Select Wi-Fi Settings
  5. Select MST-WPA-N
  6. Select Protected EAP (PEAP) as the EAP Type
  7. Select MSCHAPV2 as the Phase 2 authentication
  8. Be sure all certificates are unspecified
  9. For the Identity type in your
  10. Enter your University password for the Key, Passphrase, or Password field